Manual Filling Equipment KFE

for filling of honey-comb comforters, channeled quilts, sleeping bags and down jackets; dosing and filling is done in separate steps.

 

Mode of operation::

The individual weight of each box is filled into the dosing bin. The weight is shown on the display and may have to be adjusted by hand to the weight to be filled in. Then the filling process can be started. The blower can be stopped via foot pedal after each filling process and can again be started. The type KFE-50-I works only with compressed air (ring-injector) and is operated by footvalve.

 

Operator:

necessary for filling the dosing bin and for operating the equipment

 

Equipment consisting of:

  •  housing installed on rollers
  • dosing bin with electronic weighing device with electronic sensing system and clear digital display
  • filling blower with infinite rpm adjustment and maintenance-free brake unit, both controlled by frequency inverter
  • one filling pipe with outer dia of 40 mm (can be exchanged with other pipes dia 25 – 80 mm)
  • The type KFE-50-I can only be operated with filling pipe dia 25 mm.

Specifications

Type KFE-50-I KFE-100-1 KFE-100-2 KFE-300-1 KFE-300-2 KFE-1000
Number of dosing bins (pcs.) 1 1 2 1 2 1
Filling weight min. approx. (g) 1 2 2 5 5 10
Filling weight max. approx. (g) 50 100 100 300 300 1000
Tolerance dosing systeme (g) 0,5 1 1 1 1 2
Tolerance of each filling depending on operator(s)
Appr. capacity (fillings/min.) 1-2 (1 pers.) 1-2 (1 pers.) 2-3 (2 pers.) 1-2 (1 pers.) 2-3 (2 pers.) 2-3 (2 pers.)
Customize privacy settings