Cushion-Covering-Machine KGF

Application area:

This machine is especially suitable to cover garden-furniture-upholstery and thin-foam-pieces or similar paddings – fillings can also be covered with fleece-wadding.

 

Mode of operation:

The filling is fed into the machine manually. Two rough conveyorbelts pull the filling into the machine while at the same time four oval-shaped steel plates fold the fleece-overlap alongside.
The mouthpiece-plates press the filling on both sides together up to 12 cm. The upper and lower conveyorbelt transport the filling securely into the cover.

 

Adjustment:

Width- and height-adjustment is done steplessly by a handwheel (no height-adjustment available by Type KGF-400 – machine is built with fixed height to customers-request). The length of the mouthpiece is 500 mm (standard version) and can also be built with 750 mm length if needed.
The filling-speed is approx. 60 cm/sec. Depending on padding-length and operating personal 400 up to 500 fillings per hour can be covered with 2 operators.

 

Accessories:

When feeding the fillings by the automatic Fleece-Welding- and Feeding-Machine Type VSZ or by destacker with conveyorbelt-table Type DSA + TBA an output increase will be obtained and operators can be reduced.

 

Specifications

Type KGF-400 KGF-500 KGF-700 KGF-750 KGF-1200
Cushion Width (cm) 26-45 30-50 40-70 50-75 70-120
Cushion Height (cm) fix 2-14 2-14 2-14 3-14
Cover opening (min. cm) 26 30 40 50 70
Belt-Width (cm) 18 18 24 30 56
Motors (kW) 2 x 0,55 2 x 0,55 2 x 0,55 2 x 0,55 2 x 0,55
Length (m) 1,1 1,1 1,1 1,1 1,4
Width (m) 1,3 1,3 1,3 1,3 1,8
Height (m) 1,5 1,5 1,5 1,5 1,5
Gewicht (kg) 270 280 280 290 400
Customize privacy settings